TPM
+
power
Quick Startup Guide
Seite en-4
Revision: 02
4091-D021077
Release: 14.04.2010
3 Safety
3.1 Intended use
The servo actuator is designed for industrial applications. Its purpose is to drive machines.
Please refer to our catalogue or our Internet page for the maximum permitted speeds and
torques:
www.w-m-c.de
.
Please consult our technical service if your servo actuator is more than a year old. In this
way you receive valid data.
Please be sure to read the documentation provided by the manufacturer of the servo
actuator.
3.2 Improper use
Any use transgressing the above-named restrictions (especially higher torques and speeds) is
not compliant with the regulations, and is thus prohibited.
The operation of the servo actuator is prohibited if:
••••
It was not installed according to regulations (for example fastening bolts).
••••
The servo actuator is very dirty, damaged or blocked.
••••
It is operated without lubricant.
••••
The cables are damaged or improperly connected.
••••
The operating parameters have not been set properly.
3.3 Safety Instructions
The following symbols are used in this manual to warn you of hazards:
DANGER!
This symbol warns you of danger of injury to yourself and others.
Attention
This symbol warns you of the risk of damage to the servo actuator.
Environment
This symbol warns of environmental pollution risk.
3.3.1 General safety instructions
Working on the servo actuator
DANGER!
Improperly executed work can lead to injury and damage.
Always ensure that the servo actuator is only installed, maintained, and dismantled by
trained technicians.
