Wittenstein TPM dynamic, Operating Manual

Page: 8 / 52

Safety TPM
+
en-8 4022-D018396 Revision: 07
2.5 Reasonably foreseeable misuse
Any use that deviates from the approved technical data (e.g. speed, force, torque, temperature) is
not use as intended and is therefore not permitted.
In particular the following applications are not permitted:
- Operation of the servo actuator, without properly installing it in or connecting it to other
machines or other partly completed machines or equipment.
- Operation of the servo actuators in a defective state
- Operation of the servo actuator, without determining that the machine in which it is to be
installed complies with the provisions of the Machinery Directive 2006/42/EC.
- Operation of the servo actuator in a potentially explosive environment
- Assembly of the servo actuator without prior acknowledgment of the operating / assembly
manual
- Operation of the servo actuator without legible warning and information signs
- Use of improper lubricants
- Use of unsuitable servo controllers
- Use in improper installation, operating, performance and ambient conditions
- Assembly of the servo actuator by insufficiently competent personnel
2.6 Guarantee and liability
Guarantee and liability claims are excluded for personal injury and material damage in case of
- Ignoring the information on transport and storage
- Improper use (misuse)
- Improper or neglected maintenance and repair
- Improper assembly / disassembly or improper operation (e.g. test run without secure
attachment)
- Operation of the servo actuator when safety devices and equipment are defective
- Operation of the servo actuator without lubricant
- Operation of a heavily soiled servo actuator
- Modifications or reconstructions that have been carried out without the approval of
WITTENSTEIN alpha GmbH
2.7 General safety instructions
Faulty electrical connections or not approved, current-carrying
components can cause serious injuries and even death.
 Have all electrical connection work performed by qualified technicians
only.
 Immediately replace damaged cables or plugs.
During generator operation, voltage is induced. This can lead to lethal
current pulses.
 Ensure that no plugs and connections are laying open during generator
operation.