Wittenstein Alpha Advanced TK+ 004, Operating Manual

Page: 4 / 48

TK
+
ATEX
en-2 2022-D034859 Revision: 05
7 Maintenance and disposal................................................................................ 23
7.1 Maintenance schedule ...................................................................................... 23
7.1.1 Further maintenance intervals ...................................................................... 23
7.2 Maintenance work ............................................................................................. 23
7.2.1 Visual/Noise inspection................................................................................. 23
7.2.2 Checking the tightening torques ................................................................... 24
7.2.3 Checking for leakage.................................................................................... 24
7.2.4 Replacing the gearbox.................................................................................. 24
7.3 Startup after maintenance work ........................................................................ 24
7.4 Disposal............................................................................................................. 24
8 Disassembly....................................................................................................... 25
8.1 Removing the components of the output side ................................................... 25
8.1.1 Removing the shrink disc.............................................................................. 25
8.2 Disassembling the gearbox with the motor from the machine........................... 26
8.3 Disassembling the motor................................................................................... 26
9 Malfunctions ...................................................................................................... 27
10 Appendix ............................................................................................................ 28
10.1Specifications for mounting to a motor .............................................................. 28
10.2Specifications for mounting to a machine.......................................................... 29
10.2.1Specifications for mounting with through-holes ........................................... 29
10.3Specifications for mounting to the output side................................................... 29
10.4Specifications for startup and operation............................................................ 30
10.4.1Mounting position......................................................................................... 30
10.4.2Impermissible operating conditions.............................................................. 31
10.5Tightening torques for common thread sizes in general
mechanical engineering .................................................................................... 31
10.6Technical specifications .................................................................................... 32
10.6.1Technical specifications for TK
+
004 for use in areas
with explosion hazards ................................................................................. 32
10.6.2Technical specifications for TK
+
010 for use in areas
with explosion hazards ................................................................................. 34
10.6.3Technical specifications for TK
+
025 for use in areas
with explosion hazards ................................................................................. 36
10.6.4Technical specifications for TK
+
050 for use in areas
with explosion hazards ................................................................................. 39
10.6.5Technical specifications for TK
+
110 for use in areas
with explosion hazards ................................................................................. 41
10.7Declaration of Conformity.................................................................................. 44