Wittenborg Necta BRIO 250 Service Manual Download Page 24

NECTA SPA TECHNICAL MANUAL “BRIO 250”  
 

Service Manual: Brio 250  

Edition 02-2002 

 

24

 / 27 

 

HACCP DIRECTIVE (EEC 93/43 and 96/3) 

Outline and instructions for use

 

Notes: What is indicated by the Ec Directive

 

Directives 

EEC 93/43 and 96/3

 concern the hygiene of food products and are based on the 

HACCP 

(

H

azard 

A

nalysis 

C

ritical 

C

ontrol 

P

oint). 

The purpose of this directive is to safeguard the consumer health, suggesting a series of actions to be taken by 
the vending company, aimed at checking, identifying and correcting any critical aspects in the foodstuff chain, 
from the purchase of products and machines to the dispensing of the product. 
The 

HACCP

 is a system used to analyse any potential risks in the manufacturing and distribution cycle of food 

product and to identify critical points where such risks can occur; the system also highlights the actions to be 
undertaken and the decisions to be made with regard to such critical points, as well as the implementation of 
checking and monitoring procedures.  

 

Therefore, each vending company must develop a Company Hygiene Self-control Manual according to the 
provisions of the directive - and if necessary use the information and recommendations formulated by some 
associations in the sector. The manual must contain a programming and checking schedule for the vending 
machine hygiene condition

 

 

Important notes: 

For correct use of the machine, the directives must be fully applied. 

The operator is responsible for correct 

operations on a vending machine

 

HACCP Directives (EEC 93/43 and 96/3) 

Guidelines for correct application 

 

Ensure hygiene control with a special manual for correct hygiene practices. 

 

After cleaning, do not touch the surface of any elements that may come into contact with food. 

 

Wash your hands thoroughly, preferably using disinfectant, before starting any hygiene operations 

 

Use disposable sterile gloves 

 

Always use a clean cloth to wipe dry. 

 

Keep the work area tidy. 

 

Check that the product packages are intact and not damaged. 

 

Keep coffee and powder products in a cool, dark and dry place. 

 

Use products within the recommended time period (see expiry date on the package). 

 

Always use products from the warehouse according to the principle of “first-in first-out”. 

 

Tightly close and seal any product packages not completely used. 

 

Coffee and consumables must be kept and transported separate from the cleaning products.  

 

The product containers must be cleaned regularly (see operation instructions). 

 

Only fill coffee or other product containers with sufficient amount for the expected use until the next 
cleaning. 

 

Cleaning the machine (Page 25, 26, 27) 

 

Carefully observe the following cleaning instructions! 

 

Clean the machine, preferably at the end of the day or in the morning before the machine is used. 

 

After cleaning, dispense and check a drink (see last check). 

 

Fill in the checklist log for cleaning operations. 

 

When the display indicates an error message immediately check the trouble-shooting sheet. 

 

Use only recommended cleaning products approved for foodstuff, preferably liquid; avoid the use of powder 
and abrasive products. 

 

Summary of Contents for Necta BRIO 250




























Reviews: