![Witschi Watch Expert Operating Instructions Manual Download Page 68](http://html1.mh-extra.com/html/witschi/watch-expert/watch-expert_operating-instructions-manual_990037068.webp)
10
Troubleshooting
10.1 Error messages on the touchscreen
Error messages appear when there is a malfunc-
tion in the device. The following table provides
information about possible causes of an error mes-
sage and information about possible remedies.
Display/reaction
Description of error
Cause
Remedy
“No signal”
Measured values are not
transferred to the Watch
Expert.
n
Watch positioned
incorrectly.
n
Watch not wound.
n
Microphone cable
not connected.
n
Position the watch or
clockwork with its crown
against the signal sensor.
n
Wind the watch.
n
Connect the microphone
cable.
“Out of range”
Measured values are not
transferred to the Watch
Expert.
n
Beat number is not
set correctly.
n
Set the beat number in
accordance with the watch
specifications.
n
Set mode to
“Automatic”
.
10.2 Troubleshooting
Description of malfunction
Cause
Remedy
Implausible test result
The watch is not positioned cor-
rectly.
Reposition the watch (
Test results are not being
printed.
Printer out of paper.
Insert a new roll of paper. See the
manufacturer’s documentation.
Unclean diagram
Signal is too strong/weak.
Adjust the signal strength using the
“Signal amplifier”
touch button
).
Troubleshooting
Troubleshooting
27.02.2018
Precision measuring device Watch ...
68