manualshive.com logo in svg

Witschi Watch Expert, Operating Instructions Manual

Share
Download
Witschi Watch Expert Operating Instructions Manual Download Page 59

n

Use the microphone buttons as navigation buttons in the dis-

play mode.

n

Assign a function to both left microphone buttons.

n

Assign a function to both right microphone buttons.

n

Switch off the microphone buttons.

Fig. 35: Setting up navigation buttons

The two microphone buttons on the left can be used in the display

mode as arrow buttons (down/left and up/right). The two micro-

phone buttons on the right can be used to change parameters and

modes, depending on the touch button in question.

Fig. 36: Assigning functions

The two microphone buttons on the left (1) and two microphone

buttons on the right (2) can be assigned fixed functions which can

be used to control the touch buttons.

Use as navigation buttons

Assigning functions to microphone

buttons

 Configuring the user interface

Configuring microphone buttons

27.02.2018

Precision measuring device Watch ...

59

Summary of Contents for Watch Expert














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands