Opening the housing results in a loss of warranty.
2.4 Owner’s responsibilities
The device is intended for commercial use. The owner of the
device is subject to the statutory obligations of occupational health
and safety.
In addition to the safety indications and warnings in this manual,
you must comply with the safety, occupational health and safety
and environmental protection requirements that apply to the devi-
ce’s area of application.
The following applies in particular:
n
The owner must learn about the applicable occupational health
and safety requirements and perform a risk assessment to
identify additional hazards resulting from the specific working
conditions at the device’s site of operation. The owner shall use
this information to create operating instructions for the device.
n
Throughout the entire period that the device is in operation, the
owner shall check that the operating instructions created by the
owner comply with the current versions of regulations and must
adapt the instructions as necessary.
n
The owner shall ensure that all persons who handle the device
have read and understood this manual. In addition, the owner
shall train personnel at regular intervals and inform them of
potential risks.
n
The owner shall ensure that the service intervals described in
this manual are complied with.
n
The owner shall ensure that the service intervals for the com-
ponents are complied with.
2.5 Personnel qualifications
This manual stipulates the following qualifications for the operator:
Customer service
Certain work may only be performed by Customer Service. Cus-
tomer Service has been trained extensively for all work performed
on measuring devices.
Work that is the specified task of Customer Service personnel may
not be performed by unauthorised personnel. Contact Customer
Service when this work is due.
Owner’s obligations
Safety
Personnel qualifications
27.02.2018
Precision measuring device Watch ...
27
