WL
-
430T 4G Wireless Modem with all function
UserManual
ATTENTION:
Identifies information about practices or circumstances that can
lead to personal injury or death, property damage, or economic loss. Attentions
help you identify a hazard, avoid a hazard, and recognize the consequence.
ATTENTION:
This manual is intended for qualified service personnel
responsible for setting up and servicing these devices. The user must have
previous experience with and a basic understanding of electrical terminology,
configuration procedures, required equipment, and safety precautions.
Warning
：
This equipment is suitable for use in Class I, Division 2, Groups A,
B,
C, D or Non-Hazardous Locations only. EXPLOSION HAZARD - Substitution
of Any Components May Impair Suitability for Class I, Division II, Do not
disconnect equipment unless power has been removed or the area is known to be
non-hazardous. Module must be powered by a Class 2 Power Source.
Warning:
The RS-232 serial connector, Ethernet connector and I/O terminal
block are not for use in Hazardous Locations; they are only for diagnostics and
set-up only.
Warning:
When Antenna is installed into ultimate enclosure, it must be threaded
to appropriate port to ensure mechanical securement.
Important Notice:
Due to the nature of wireless communications, data transmission and reception can never
be guaranteed. Data maybe delayed, corrupted (that is, it may have errors), or be totally lost.
Significant delays or losses of data are rare when wireless devices such as Witlinc
Technology Wireless products are used in a normal manner with a well-constructed network.
Nevertheless, the WL-430T-A should not be used in situations where failure to transmit or
receive data could result in damage of any kind to the user or any other party, including but
not limited to personal injury, death, or loss of property. Witlinc Technology accepts no
responsibility for damages of any kind resulting from delays or errors in data transmitted or
received using Witlinc Technology products, or for failure of the (WL-430T-A) to transmit or
receive such data.
