WL
-
430T 4G Wireless Modem with all function
UserManual
11
1.
Insert the SIM card into the WL-430T-A and cycle power. The SIM card is read by
the WL-430T-A upon boot up.
2. Scroll down your mouse to the
Network
,
Interface
,
and choose
3G,
then click
EDIT.
3. Enter the Access Point Name (APN) information in the APN field. This information
is provided from your cellular provider. Then Click Save & Apply. The module will
reboot.
4.After the module reboots, it establishes a PPP (Point to Point Protocol or "dial" up
connection) link to your cellular provider network, also called registering on the
network, and receives an IP address.
5.When the module has received its IP address from your cellular provider, a
connection to the Internet or the cellular network is also available for computers or
other devices to connect directly to the WL-430T-A.
6.The GSM network information is now displayed on the Interface Status on the top
of the webpage.
2.4
Setup the WAN Interface
The WL-430T-A support layer3 routing function, Enable the Routing Function
WAN interface is needed to be configured. The customer can connect two
networks which it was different network segments.
1.
Insert the Ethernet Cable from Network-A into the WAN port, and
insert the Ethernet Cable from Network-B into the LAN port.
2.
Configure the LAN interface IP address refer to the Network B, Configure
to the same segment with Network B
(refer to 2.2 Setup the WL-430T-A IP
address)
3.
Mouse Scroll down
to the
Network
,
Interface
,
and choose
WAN,
then click
EDIT.
