General usage
Always consult your doctor. Self-diagnosis of measurement results
and self treatment are dangerous People with severe blood flow
problems, or blood disorders, should consult a doctor before using
the blood pressure monitor. Cuff inflation can cause internal bleeding.
Operational factors such as common arrhythmias, ventricular
premature beats, atrial fibrillation, arterial sclerosis, poor perfusion,
diabetes, age, pregnancy, pre-eclampsia or renal disease can affect
the performance of the automated sphygmomanometer and/or
its blood pressure reading. This device is a precision measuring
equipment liable to be understood by lay user but it still should be
handled with care. A long exposure of the device to lint, dust or sunlight
might reduce its life time or damage it. Damaged cuff or sensor
might lead to incorrect measurements.
– Do not leave the blood pressure monitor unattended with
infants or persons who cannot express their consent.
– Do not use the blood pressure monitor for any purpose other than
measuring blood pressure.
– Do not disassemble the blood pressure monitor.
– Do not operate the blood pressure monitor in a moving vehicle
(car, airplane).
– Do not use a cellular phone near the deivce. It may result in
an operational failure.
– Improper continuous pressure of cuff or too frequent measurements
may interfere blood flow and result harmful injury to the users.
– Do not apply the cuff over the users’ arm bearing a wound or
medical treatment and so on, as this can cause further influcence
on the therapy.
AAA alkaline cells usage
– If AAA alkaline cells fluid should get on your skin or clothing,
immediately rinse with plenty of clean water.
– Use only four AAA alkaline cells with this blood pressure monitor.
Do not use any other types of AAA alkaline cells.
– Do not insert AAA alkaline cells with their polarities incorrectly aligned.
– Replace old AAA alkaline cells with new ones immediately.
Replace all four AAA alkaline cells at the same time.
– Do not use new and used AAA alkaline cells together
Replacing the AAA alkaline cells
If the low battery symbol appears in the Withings application,
replace all four AAA alkaline cells at the same time.
1. Remove the AAA alkaline cells cover at the lower end of
the aluminum tube.
2. Install or replace four AAA alkaline cells so that the + (positive)
and – (negative) polarities match the polarities indicated on
the AAA alkaline cells compartment.
3. Put the AAA alkaline cells cover back in place.
If the device will not be used for a long period of time, it is advised
to remove the alkaline cells.
CAUTION
