ADFA
Ultra-Wideband Active Antenna
with remote controlled filter bank
pg. 2
SETUP CONTROL
1)
Simple operation with 4 buttons to quickly monitor
and setup the antenna booster and filters through
the user menu.
2)
Signaling LED multicolor:
o
White: when the unit is in bootloader
mode during the firmware upgrade
o
Orange
: booster bypassed, antenna becomes passive
o
Green
: active booster with gain between -12 ÷ 14 dB (low consumption
approx. 65mA@12V)
o
Blue
: active booster with gain between 15 ÷ 27 dB
(consumption approx. 110mA@12V)
o
Red
: fast blinking (when blinking function is activated by Manager or by
MAT/SPL for easily recognizing of antenna)
o
Red
: fixed, alarm (type of alarm is shown on the display)
o
OFF: antenna OFF mode or LED disable by settings
3)
TFT – transflective (176 x 176 pixels, RGB)
MENU STRUCTURE AND NAVIGATION
STATUS menu
This is the first menu displayed after power up and provides access to submenus and
displays a summary of antenna settings.
Push MENU/SAVE to enter in the menu
Use the arrows to navigate the menu and edit the parameters
Keep pushing MENU/SAVE for 2 seconds to save
Confirm the new setup value within 5 sec. by pressing one more time on the MENU/SAVE
button. Without any confirmation within 5 sec. the modification is cancelled.
NAME of ANTENNA
Gain
Frequency range
Serial Number
2
1
3
