5. Operation
Further on, operation will described together with the electro-
mechanical drive unit FL51 an its remote control unit RCU.
If your configuration is not equipped with such operating
features you should have a special attention to the following
points:
-
To direct the searchlight, only use the appropriate
handles. Do not touch the housing of the searchlight
during operation, -
Danger of burns!
-
Ensure that at power on and during operation nobody is in
front of the searchlight, -
Danger of blinding!
-
Switch S1 to turn on the searchlight as described in
chapter 5.2 is a separate switch in your configuration and
is not located in the RCU. Because there is no electro-
mechanical drive unit, switch S2 and the joy stick are not
available.
-
Continue reading with chapter 5.2
Turning on the
searchlight
.
5.1 Control unit RCU
1
Drive unit indictor lamp
S2
ON/OFF switch for drive unit
2
Joystick for drive unit
S1
On/off Switch for Searchlight
3
Searchlight indicator lamp
5.2 Turning on the searchlight
Danger of burns!
Never touch the searchlight during
operation. The housing may reach temperatures as high as
180 °C. In case of burns, immediately cool the burned area
and get medical aid.
Danger of blinding!
Never look into the light source during
operation. This poses a danger to your eyesight. Never point
SH400-575 Rev.230903E
Operation
21
SH400-57
5 Rev.
230903E
