9 7
5
3
4
2
7.4 Changing the primary reflector
Danger!
This repair work must be completed by a qualified
electrical technician!
Be sure to read chapter 7.1
Before you begin
first.
Removal:
1. Loosen the screws on the back of the searchlight and take
out the back plane
9
together with the inside chassis.
2. Disconnect the external cable to get the assembly free.
3. Place the assembly on a safe and clean work surface.
4. Take out the lamp
2
and store it in a safe place. See
chapter
7.3 Changing the lamp
.
5. Disconnect the two lamp cables
6
from the lamp carrier
1
.
6. Loosen the two screws
8
underneath the lamp carrier,
which hold the lamp carrier
1
on its support
7
and take off
the lamp carrier.
7. Take off the whole lamp carrier assembly and place it out
of the way.
8. Loosen the leaf springs
4
on the reflector
5
.
9. Cut open silicone seam on the back with a knife and
remove the reflector
5
from its retaining ring.
1
8 6
SH400-575 Rev.230903E
Replacing defective parts
27
SH400-57
5 Rev.
230903E
