I. Product Overview
1. Power Button
2. Motion Detection Button
3. Camera Button
4. Previous Button
5. Light On/Off Button
6. Confirmation Button
7. Video Recording Button
8. Voice/Sound Activated Recording Button
9. Next Button
II. What’s In the Box
-1× Bulb Camera
-1× Card Reader
-1× Remote Controller
-1× 20cm E27 Bulb Extension Adapter
BC301
User Guide
10. Camera Lens
11. LED Beads
12. Micro SD Card Slot
13. Reset Button
14. AV Cable Port
15. Blue Indicator Light
16. Red Indicator Light
17. Power Indicator Light
III. Operation
Please check things below before you start:
>> Insert a SDHC Class 10 Micro SD card (4GB-32GB, format it for the first usage)
into the card slot.
>> Screw the bulb into a standard E27 light fixture.
>> Remove the insulating film from the bottom of the remote controller.
[Note]:
If no Micro SD card is fitted into the bulb, the blue indicator light will keep flashing.
3.1. POWER ON/OFF
3.1.1. The bulb will be powered on automatically once connected to outlet power
supply. The red and blue indicator lights will illuminate for 3 seconds first. Then the
red one will turn off, while the blue one will blink twice and turn off. Now the camera
has entered into standby mode.
3.1.2. Power off the camera by pressing Power Button once again. The red and blue
indicator lights will flash fast 3 times and then turn off
3.2. VIDEO RECORDING
3.2.1. The bulb will be powered on automatically once connected to outlet power
supply. The red and blue indicator lights will illuminate for 3 seconds first. Then the
red one will turn off, while the blue one will blink twice and turn off. Now the camera
has entered into standby mode.
3.2.2. Press Video Recording Button once to record video. The blue indicator light will
stay illuminated.
3.2.3. Press Video Recording Button again to stop recording video. The blue indicator
light will turn off and the camera will be back to standby mode.
[Note]:
1). A video file will be generated and saved every 5 minutes automatically.
2). Video Resolution: 1920×1080P Video Format: AVI
3.3. MOTION DETECTION RECORDING
3.3.1. The bulb will be powered on automatically once connected to outlet power
supply. The red and blue indicator lights will illuminate for 3 seconds first. Then the
red one will turn off, while the blue one will blink twice and turn off. Now the camera
has entered into standby mode.
3.3.2. Press Motion Detection Button once to enter into motion detection mode and
the blue indicator light will keep flashing slowly.
3.3.3. The camera will record video automatically when a movement is detected.
3.3.4. Switch to another mode directly, or press Video Recording Button once to exit
motion detection mode.
[Note]:
Each video clip lasts 30 seconds.
3.4. AUDIO ACTIVATED VIDEO RECORDING
3.4.1. The bulb will be powered on automatically once connected to outlet power
supply. The red and blue indicator lights will illuminate for 3 seconds first. Then the
red one will turn off, while the blue one will blink twice and turn off. Now the camera
has entered into standby mode.
3.4.2. Press Voice/Sound Activated Recording Button once to enter into sound acti-
vated video recording mode and the red indicator light will stay illuminated.
3.4.3. The camera will record video automatically when audio is detected.
3.4.4. Switch to another mode directly, or press Video Recording Button once to exit
sound activated video recording mode.
[Note]:
Each video clip lasts one minute.
3.5. STILL/CAMERA PHOTOGRAPH
3.5.1. The bulb will be powered on automatically once connected to outlet power
supply. The red and blue indicator lights will illuminate for 3 seconds first. Then the
red one will turn off, while the blue one will blink twice and turn off. Now the camera
has entered into standby mode.
3.5.2. Press Camera Button once to enter into auto photograph mode and the red
indicator light will keep flashing slowly.
3.5.3. A photo will be taken automatically every 3 seconds.
3.5.4. Switch to another mode directly, or press Video Recording Button once to exit
auto photograph mode.
3.6. LIGHT ON/OFF
Press Light On/Off Button once to turn on or off the light.
IV. Video/Image File Uploads
4.1. When the bulb is powered off, remove the Micro SD card and insert it into a card
reader.
4.2. Insert the card reader into a PC computer.
4.3. The Micro SD card will be recognized as a removable disk drive.
4.4. All the files can be accessed in the “
DCIM
” folder.
VII. Setting the Date/Time Stamp
5.1. When the bulb is powered off, remove the Micro SD card and insert it into a card
reader.
5.2. Insert the card reader into a PC computer.
5.3. Removable disk drive folder appears.
5.4. Click on the drive in the root directory and inside the root directory, create a file
named “time.txt”.
5.5. Write the current date and time in the file“time.txt” with the correct format:
Year.Month.Day Hour:Minute:Second. (For example: 2016.03.08 14:24:32). Save
this file.
5.6. Restart the camera and the system will upgrade the program automatically.
VII. Resetting
If for any reason the bulb stops responding or isn’t working properly, a quick reset will
restore it back to normal operation.
Operation:
Hold down Reset Button for 3 seconds to reset the bulb. The red and blue
indicator lights will turn off.
