Wisenet HRX Series User Manual Download Page 78

Page: 78 / 109

78_

live viewer

Changing the Pattern oF sPLit sCreen

Click the < > button and select the desired split screen.
The selected split screen is applied to the video window.

Changing oVeraLL ChanneL asPeCt ratio

Video screen ratio for all channels can be changed in live split screen mode.
Click <

> at the bottom of the screen. It changes to the actual proportion of the video.

If you want to go back to the previous screen ratio, click <

> again.

FuLL sCreen Mode

You can change to full screen mode, which has no top/bottom/left/right areas of the live screen.
Click < > at the bottom of the screen.

To exit the full screen, press the

esC

key on the keyboard or click < > at the bottom of the full screen mode.

general mode

Full screen mode

Summary of Contents for HRX Series














































































































Search results

Summary of Contents for HRX Series

Reviews:

Related manuals for HRX Series

Brands by name

Popular brands

Wisenet HRX Series, User Manual

Search results

Summary of Contents for HRX Series

Reviews:

Related manuals for HRX Series

Brands by name

Popular brands