WISE CONTROL
1. General
and it is called "Flowmeter Diagram"
INSTALLATION & OPERATION
MANUAL
DOC.NO. : C-QIM-2731-F14
PAGE : 3/10
INSTRUCTION FOR USAGE OF FLOWMETER
For the correct usage of the Flowmeter, Installation, Maintenance, Repair and Inspection
shall be done at the site. No matter how excellent in the design and best parts applied
in the Flowmeter, not only the flowmeter is bad in its performance but also the whole
system is low in the creditability and safety without good consideration on the Process,
and well organized work control and maintenance plan.
Hence, due to the Carelessness in installation and maintenance of the Flowmeter in the
Process can cause the bad performance or malfunction of the whole system, the correct
installation and proper maintenance program shall be set up as a part of the Process
and executed by the plan.
2. Installation
(1) Flometer Diagram
It is designed the basic piping diagram to maximize the performance of the flowmeter,
As shown on Fig.1-1, each entity has own role and is required for the accurate
measurement of the flow rate. But, the actual "Flowmeter Diagram"can be differed by
the principle of the applied flowmeter and the fluid flow to be measured, then please
refer this manual carefully to make the proper diagram. Also simple explanations for
each entity are added.
