TO REPLACE DISPLAY LIGHT
Only shatter resistant light bulbs which meet or exceed NSF Standards specifically designed for food holding
units must be used. Breakage of bulbs not specially coated could result in personal injury and/or food
contamination.
Disconnect the power supply cord, and wait until unit has completely cooled. Unscrew display light, and
replace with a new specially coated bulb of the same style and wattage.
P.O. Box 10 • Oregon, WI 53575 • Ph: 608.835.3106 • Fx: 608.835.8273 • wiscoind.com • wiscomade.com
TROUBLESHOOTING
:
Unplug unit from power source, and allow to cool completely before performing any maintenance or cleaning.
Unit not working:
•
Check the power switch position, power cord, and/or electrical circuit.
Display light not working:
•
Tighten or replace the bulb.
Unit not heating properly:
•
Has food been prepared in advance and placed in warmer at proper serving temperature?
•
Check heat settings. Is it at correct setting for your food product?
NOTES:
MAINTENANCE:
Summary of Contents for 282-16
Page 5: ...Model 282 16 Exploded View...
