8
WPS-565-BUL-A Installation Manual
4. Installation Instructions
Wiring must be installed before the camera. See the previous page for
connections and wiring recommendations.
Step 1. Prepare for Installation
A. Unpack the camera and locate the included hardware, silica packet, and
3mm Allen wrench. If a mounting accessory is being used, unpack the acces-
sory and become familiar with its installation and use.
B. Depending on the mounting location, it may be easier to position for the cor-
rect field-of-view before installation. See step 3, “Position the Camera” on the
next page for adjustment instructions.
Step 2. Mount the Camera
Using Mounting Accessories
Mount the accessory according to its instructions, make wiring connections, and
mount the camera. Then, continue these instructions at Step 3 on the next page
to complete camera installation
.
Surface Mounting
A. Use the camera mounting base as a template to mark the location of the 3
screws on the mounting surface.
B. Connect the camera to the wiring and move it into position. Avoid pinching
the wires between the camera and the mounting surface.
C. Use 3 of the included screws to secure the camera and hand-tighten them
evenly.