WPS-565-BUL-A Installation Manual
17
© 2014 Wirepath Surveillance
6.4.3. WHITE BALANCE Menu
White balance adjusts the image color according to the lighting conditions of
the scene to correct for different lighting color ranges.
SETUP
WHITE BAL
ATW
•
Move the joystick left or right to select the desired mode.
6.4.3.1. Auto Modes
Auto modes are preset to match the color needed for several common types of
light bulbs. Use the MANUAL setting below for other conditions. Move the joystick
left or right to change the mode.
•
ATW1 —
Auto Tracking White Balance, color temperature is set to 2000° K.
•
ATW2 —
Auto Tracking White Balance, color temperature is set to 2500° K.
•
AWB —
Auto White Balance
•
ANTI CRL —
(Anti Color Roll) Use to avoid rolling color under flourescent lights.
6.4.3.2. AWC
SET Mode
This function is ideal for environments with the predominance of a single color.
For example, in a casino where the camera is pointed to a green table, the
color will be inaccurate. The overall tone of the picture will be too red. This mode
compensates the white balance and provides a more accurate color.
•
Move the joystick left or right in the WHITE BAL menu to select AWC
SET mode,
and press the OSD button for 3 seconds. The camera will automatically set the
white balance value based on the scene.
6.4.3.3. WB MANUAL Setting Mode
Use manual mode to correct for irregular lighting.
WB MANUAL
COLOR TEMP
MANUAL
BLUE
|
|
||||||||||||||
019
RED
|
|
||||||||||||||
024
RETURN
RET
•
Move the joystick left or right in the WHITE BAL menu to select MANUAL and
enter the sub-menu.
•
Select a manual preset for INDOOR or OUTDOOR conditions, or select MANUAL
to set blue and red values individually.