WPS-565-BUL-A Installation Manual
21
© 2014 Wirepath Surveillance
6.4.7. SPECIAL Menus
6.4.7.1. CAM TITLE Setting
The CAM TITLE sub-menu provides the ability to set a camera name and have it
appear on the screen.
•
CAM TITLE
— Set to ON
to displa
y the camera name on the screen.
•
Set a camera name by selecting one letter/number at a time using the menu
at the bottom of the screen. Assigning a name that highlights the location of
the camera such as Lobby, Main Hall, etc. is recommended.
•
Press
CLR
to clear all letters, press
POS
to choose the position of
CAM NAME
on
the screen, and press
END
to exit the menu.
6.4.7.2. MOTION Detection
Motion Detection allows for up to 4 zones of motion detection. When an
object in one of the zones moves, the camera will highlight motion in magenta
rectangles. This allows for monitoring motion more efficiently.
Scroll left or right to set MOTION DET to ON and enter into the Motion sub-menu.
MOTION
AREA SEL.
AREA1
AREA STATE
ON
HEIGHT
||||||||||
|
|||||
010
WIDTH
|
|
||||||||||||||
004
LEFT/RIGHT
|
|
||||||||||||||
005
TOP/BOTTOM
|||
|
||||||||||||
005
DEGREE
||||||||||||||||
|
040
VIEW
ON
RETURN
RET
•
AREA SEL. —
Select from zones 1~4 to adjust the motion detection settings of
that area(zone).
•
AREA STATE —
Set to ON to display the detection zone on the screen: set to
OFF to hide the detection zone on the screen.
•
Customize the size and the position of each detection zone by adjusting
HEIGHT
,
WIDTH
,
LEFT
/
RIGHT
,
TOP
/
BOTTOM
values.
•
DEGREE —
Increase to raise motion detection sensitivity.
•
VIEW —
When set to ON, the screen will highlight motion of the moving object
with magenta rectangles.