WPS-565-BUL-A Installation Manual
15
© 2014 Wirepath Surveillance
6.4. OSD MENU SETTINGS
6.4.1. LENS Menu
The amount of light entering the camera lens is controlled by the size of the
aperture, (called IRIS in SETUP menu).
SETUP
LENS
DC
• The
default
DC setting is recommended when lighting levels vary regularly.
•
For conditions with fixed, low-level lighting, the MANUAL setting may be ideal.
Both settings offer additional setup options for fine tuning:
•
Set the lens mode on the main setup screen. Move the joystick left and right to
select DC (Auto-IRIS), or MANUAL mode and enter each setting’s sub-menu.
6.4.1.1. DC Mode
DC mode is the recommended setting for outdoor locations and environments
with varying light conditions. In DC mode, the camera adjusts the aperture of the
lens automatically based on the lighting conditions of the environment.
DC LENS
BRIGHTNESS
||
|
|||||||||||||
037
IRIS SPEED
|
|||||||||||||||
000
RETURN
RET
•
Brightness —
Set level from 1(dark) to 255(bright). Too much brightness will
cause washing out. Too little will leave the picture too dim to view clearly.
•
Iris Speed —
Sets the reaction speed of iris changes related to light changes.
Leave the setting at 0 unless there is light strobing regularly in the scene
causing excessive variation in brightness.
6.4.1.2. MANUAL Mode
In this mode the aperture is set fully open and light level is not controllable.
This setting is only recommended for an environment with consistent lighting
conditions.
MANU. LENS
BRIGHTNESS
||
|
|||||||||||||
037
RETURN
RET
•
Brightness —
Set level from 1 (dark) to 255 (bright). Too much brightness will
cause washing out. Too little will leave the picture too dim to view clearly.