19
WPS-550-DOM-A Installation Manual
© 2013 Wirepath Surveillance
• D
N LEVEL: Set the level that the camera switches from color
mode to B/W mode. The larger the value, the quicker the camera
will switch to B/W mode.
• D
N DELAY: Set the delay time before the camera switches
from color mode to B/W mode. The delay time can be set from
0 to 30 seconds.
• N
D LEVEL: Set the level that the camera switches from B/W
mode to color mode. The larger the value, the longer it takes
for the camera to switches to color mode.
• N
D DELAY: Set the delay time before the camera switches
from B/W mode to color mode. The delay time can be set from
0 to 30 seconds.
B/W Setting
• BURST:
- ON: The B/W image is actually a grey
image and contains the color signal.
- OFF: This is a true B/W image containing
no color signal.
• IR SMART: When an image is too close
to the camera, IR Smart prevents
over-exposure by adjusting the output
intensity of the IR LEDs
• IR LEVEL: The IR output level can be
adjusted by selecting HIGH or LOW.
DPC
DPC (Dead Pixel Compensation) automatically removes defective pixels
and “fills in” the image. Use the UP arrow function to exit this menu without
performing DPC.
SPECIAL
CAM TITLE Setting
The CAM TITLE provides the ability
to set a camera name and have
it appear on the screen.
DAY NIGHT B/W
BURST OFF
IR SMART
OFF
IR LEVEL
HIGH
RETURN RET
SPECIAL
CAM TITLE
ON
MOTION OFF
PRIVACY OFF
PARK LINE
OFF
IMAGE ADJ
COMM ADJ
LANGUAGE ENGLISH
VERSIONS
10 09 09
RETURN RET
