Wireless la5570 User Manual Download Page 78

Page: 78 / 115

Chapter 4: Web Management

EN-78

4.4.4 PIR Motion Sensor

This option allows you to configure the Wireless Motion Sensor settings.

1. Click .

2. Select the location, device number, and specify the sensor name.

Click on the pull-down menu to see more options.

3. Select the security zone while enabling partial arm.
4. In the

Camera Link

field, select the camera for enabling the event-

triggered recording.

5. In the

PIR Alarm Timer

field, set the alarm timer for siren once triggered.

This is to avoid any false alarm likes animal immunity.

6. Click

Apply

to save the settings.

•

To avoid false alarm and save the battery power, there is a 30 seconds lock-out

after motion sensor triggered; which means after the motion sensor triggered, it
will stay in sleep mode for 30 seconds.

Note

Summary of Contents for la5570




















































































































Search results

Summary of Contents for la5570

Reviews:

Related manuals for la5570

Brands by name

Popular brands

Wireless la5570, User Manual

Search results

Summary of Contents for la5570

Reviews:

Related manuals for la5570

Brands by name

Popular brands