Wireless la5570 User Manual Download Page 31

Page: 31 / 115

Chapter 3: APP Management

EN-31

Chapter 3: APP Management

3.1 Download APP on Smart Handheld Device

By using APP, you can view the sensors status, video live view, and access
the Web Management remotely to monitor your home and family at anytime
and anywhere.

•

The user interface varies depending on your smart handheld device design.

3.1.1 Installing Application (iOS)

Recommended environment:

•

iPhone 4 or above / iPad2 or above

•

iOS 6.1 or above

1. Download the APP (TECHView Home Auto) from

App Store

2. Install the application.

3.1.2 Installing Application (Android)

Recommended environment:

•

Android phone CPU 1 GHz or above, with Duo core

•

Android 4.0 or above

1. Download the APP (TECHView Home Auto) from

Google Play

2. Install the application.

Note

Summary of Contents for la5570




















































































































Search results

Summary of Contents for la5570

Reviews:

Related manuals for la5570

Brands by name

Popular brands

Wireless la5570, User Manual

Search results

Summary of Contents for la5570

Reviews:

Related manuals for la5570

Brands by name

Popular brands