manualshive.com logo in svg

Wireless Sensor Networks Stargate, Developer'S Manual, Page: 13 / 52

Share
Download
Wireless Sensor Networks Stargate Developer'S Manual Download Page 13

Stargate Developer’s Guide  

 

 Wireless Sensor Networks  

 

Doc. # 7430-0317-13 Rev. B 

Page 11

 

define_partition: base 0x00140000 
define_partition: partition_table 0xA3A00014 
defining partition: root 
+ set macaddr "00:50:C2:2F:33:83" 
  setting param <macaddr> to value <00:50:C2:2F:33:83> 
+ set ipaddr "10.1.1.171" 
  setting param <ipaddr> to value <10.1.1.171> 
+ set gateway "10.1.1.221" 
  setting param <gateway> to value <10.1.1.221> 
+ set netmask "255.255.255.0" 
  setting param <netmask> to value <255.255.255.0> 
+ set serverip "10.1.1.46" 
  setting param <serverip> to value <10.1.1.46> 
+ set loadmethod "tftp" 
  setting param <loadmethod> to value <tftp> 
+ set netcfg "manual" 
  setting param <netcfg> to value <manual> 
+ set boot_flags 0x00000004 
  setting param <boot_flags> to value <0x00000004> 
+ set enable_mmu 1 
  setting param <enable_mmu> to value <1> 
 

 

Now you may press 

Enter

, so as to start booting up the Linux OS. If no keys are pressed, after a 

timeout of about 10 seconds, the Linux OS boots up automatically. Note that the configuration 
parameters may be different for your board, due to unique assignment of the MAC address. The 
following message is seen during Linux Bootup: 

 

booting flash... 
booting kernel from partition >kernel< 
kernel partition base 50080000 
kernel_magic=E1A00000 
kernel_region_words[9]=016F2818 
Linux ELF flash_imgstart=50080000 size=000C0000 dest=A0000000 offset=00008000 
MMU Control=00000079 
MMU PIDVAM=00000000 
copying Linux kernel ... done 
root_filesystem_name=initrd 
Grabbed linuxargs, argc = 00000002 
… 
… 
Starting PCMCIA services: cardmgr. 
cardmgr[106]: starting, version is 3.1.22 
cardmgr[106]: watching 2 sockets 
cardmgr[106]: exiting 
Starting BlueZ HCI server: hcid. 
Starting OpenBSD Secure Shell server: sshd. 
usb.c: registered new driver usbdevfs 
usb.c: registered new driver hub 
Pre-allocating 32 buffers for pool 0xc3eef5a0 
Pre-allocating 32 buffers for pool 0xc3eef4e0 
usb-ohci.c: USB OHCI at membase 0xf4000400, IRQ 149 
usb.c: new USB bus registered, assigned bus number 1 
hub.c: USB hub found 
hub.c: 1 port detected 
Enabling remote wakeup... 
SCSI subsystem driver Revision: 1.00 

Summary of Contents for Stargate





















































Reviews:

No comments