Wi-Ex
zBoost YX500/510 Series Installation Guide
12
4) From the attic, gently pull up the string until the coaxial cable can
be grasped.
5) Connect the coaxial cable to the Signal Antenna.
Figure 6 - Base Unit with Power Cord and Cable Connectors
1) Attach the coaxial cable, which should already be attached to the Signal
Antenna, to the Base Unit
2) Attach the antenna to the Base Unit and position it vertically.
3) Set the Base Unit on a furniture piece or shelf.
Installing the Base Unit
For the widest possible signal reception, it recommended that you install the
YX500 Series Base Unit near the middle of a room or on an interior wall. This
Base Unit uses an omni-directional antenna which delivers the signal in a
circular pattern around the antenna. If you decide to install the Base Unit on or
near an outside wall, we recommend purchasing a Directional Base Unit
Antenna (see page 4). This antenna will focus the signal in toward the rooms.
The Base Unit can either be directly mounted on a wall or set on a furniture
piece (e.g., a bookshelf, desk, filing cabinet, end table etc.). The Base Unit
performs best when located at least 4 feet above the floor or at about the height
of the cell phone when it is typically in use (avoid placing the Base Unit on the
floor).
For the best results, avoid placing the Base Unit antenna within 2 feet of other
wires or metal objects.
wpsantennas.com
(877) 594-5766
