i
Respond Touch Technical Manual 4
1
. Press the power button
to turn on the Touch base.
2.
When the base’s UID is displayed at the bottom of the main splash screen,
press the following buttons in order: F2
, Backspace
, and Flag
.
3
. From the diagnostics screen, press the soft button under CFG.
3.
From the Configure Unit screen, select the soft key under RF.
4.
Connect spectrum analyzer to base’s antenna connection.
5.
Offset #1 is for Lite remotes, Offset #2 is for Touch remotes. Select the
Offset to be adjusted, use the up and down arrows to adjust offset until the
spectrum analyzer shows the base on the center frequency for that offset.
6.
Press F1
when complete.
Turn Base on in Programming Mode
1.
Press and hold the F1
button.
2.
Press and release the power
button without letting go of F1
button.
3.
When USB Program Utility appears, let go of F1
.
4.
Press the Enter
button to delete old code.
5.
Base will shut off when it has completed programming.
