Overscan
...............
On some monitors (CRT & others), part of the image
is usually obscured by the frame. Selecting 'overscan'
will cause the Mason to slightly shrink everything so it
will fit better on the screen.
Picture Controls
...
The Mason allows you to use the remote control to
adjust the color, contrast and brightness of the image.
You can disable these adjustments if you prefer.
Audio Output Settings
This group of settings controls the audio output format and optionally allows the
volume to be controlled with the remote.
Digital Outputs
.....
Specifies what data is sent out of the
digital
audio
ports (SP/DIF, TOSLINK and AES/EBU). Choose
pass-through if you are using an external decoder
(typically a receiver with built-in Dolby and DTS).
Volume Control
.....
The Mason's remote can be used to adjust the output
sound level, or you can choose to disable this feature
(recommended if you are using an external decoder.)
Network Settings
This section specifies the network address of the Mason IP itself. If you change
the network settings and then click the 'Save' button, you will be disconnected
from the web configuration pages. You will need to enter the Mason
ʼ
s new ad-
dress into your browser to continue.
Changing these is the same as changing the Network Settings using
the remote control.
Addressing
...........
Choose Manual or DHCP. If you choose DHCP, you
don
ʼ
t need to complete the other fields.
Mason User Guide
Jan 2008
14 of 27
