SETTING UP THE MASON
There are three parts to setting up the Mason:
•
Connect the Mason to power, network and your TV
•
Configure the Mason
ʼ
s network address
•
Use a web browser to configure your servers
The next few pages cover these items in detail.
Mounting the Mason
The Mason is a standard 1U rack-mount device, which can either be mounted in
a standard equipment rack, or simply placed on a horizontal surface.
As shipped from our factory, the Mason has self-adhesive rubber feet on its bot-
tom to prevent scratching any surface you may set it on.
1. If you will be mounting the Mason in a rack, you may need to peel off
the rubber feet (depending on the clearance below the Mason).
The Mason has vents on its left and right side panels. Be sure these
vents are not blocked when you put the Mason in place.
Batteries
2. If the batteries are not already in the remote control, install them now.
The Connections
All the connections to the Mason are made on its rear panel.
Analog
Video Outputs
Audio Outputs
Ethernet port
and USB
ports
DVI digital
video output
External IR
sensor input
Power input
and
Switch
Power
3. Connect the included power cord to the rear of the Mason, and plug it
into a standard 110 volt electrical outlet.
Connect Your Network
4. Connect your Ethernet network to the jack on the rear of the Mason.
Mason User Guide
Jan 2008
8 of 27
