I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
I
I
n
n
s
s
t
t
r
r
u
u
c
c
t
t
i
i
o
o
n
n
s
s
►
Init String – any AT initialisation commands required by the
uplink service (if required the uplink service provider can
provide this information).
►
Extra Init String – any AT initialisation commands required
before the uplink service begins (if required the uplink
service provider can provide this information).
►
Inactivity Timeout (in seconds) – the Wired Ocean service
will automatically disconnect if no uplink activity is detected
for the period of time selected.
►
Port – the physical connector on the S-Box that the device
will connect to. RS232 is the 15 pin d-type connector. USB
is the small rectangular connector. The “Port“ drop down
menu shows where the device is connected to your S-Box
(RS232 Serial Port, First USB Port, Second USB Port, etc.)
►
Baud rate – the data rate between the S-Box and the
uplink device in bits per second (e.g. 115200 is 115200
bits per second). This is determined by the type of
connection used. Normally 115200 or sometimes 57600.
►
Flow control – (or RS232 RTS/CTS, XON/XOFF) for the
serial interface to the uplink hardware should normally be
set to ‘Auto’ (where the S-Box automatically selects
software flow control except for Globalstar and analogue
modems where it selects hardware flow control). If you
wish to install an uplink device that does not seem to be
reacting correctly to the S-Box please check the RS232
flow control that is recommended for your selected uplink
device (it should be indicated in the relevant user manual).
GPRS Preset Uplinks
:
The S-Box has preset settings for a variety of GSM modems
and cellular network operators. Select your phone type from
the “phone” drop-down menu. Select your service provider
from the “network operator” drop-down menu. Choose the
port, port speed and flow control as above.
WAN port Uplinks:
To connect a router-based uplink device such as 3G, VSAT or
Wi-Fi/WiMAX to the S-Box using the WAN port:
►
Select WAN Port from the “Connection type” drop-down
menu.
Page 11
