WIPLINE MODEL 8000 SERVICE MANUAL
Page 36 of 62
1002554 • Rev H
INSTRUCTIONS/PROCEEDURES
HOURLY LIMITS
MECHANIC INSP.
25
50
100 200
Annual
Right Left
Clean the wheel wells to facilitate general
condition inspection.
X
X
Main gear oleos - inspect for evidence of
leakage, proper extension, check cylinder for
corrosion, pitting, cleanliness and security
X
X
Hydraulic lines and fittings - inspect for leaks,
condition and security.
Refer to section 5.2
X
X
Hydraulic Manifolds (if equipped) - inspect for
condition, security, and leaks.
X
X
Brake system plumbing - inspect for leaks,
condition and security.
X
X
Main gear oleos – Check for static
compression, leaks and proper pressure. The
oleo should be fully serviced or replaced with
overhauled as required.
If full servicing is required, use
5606 hydraulic fluid & Nitrogen
Refer to section 5.2
X
X
Perform retraction test:
Inspect main gear up and down
lock hooks for proper
engagement.
X
X
Inspect nose gear trolley for
proper travel.
X
X
Inspect nose gear for excessive
play in the down position
X
X
Perform emergency gear
extension & retraction
X
X
Nose and main wheel bearings - disassemble
and inspect
Re-grease bearings with
recommended water resistant
grease
X
X
