WIPLINE MODEL 8000 SERVICE MANUAL
1002554 • Rev H Page
35
of
62
INSTRUCTIONS/PROCEEDURES
HOURLY LIMITS
MECHANIC INSP.
General
Details
25
50
100 200
Annual
Right Left
Nose gear pivot blocks and forks - inspect
for condition, lubrication, corrosion, paint.
Clean and Inspect
X
X
Nose & main wheel bearing - grease Zerks
X
X
Clean and Inspect Main gear slide tube, ram
and locking hooks for lubrication. Lube
carriage zerk liberally.
Grease with HCF p/n 605.
Spray locking hooks form the
top with LPS 2 to penetrate.
X
Hydraulic fluid level: Mil-H-5606
X
X
Wheels and tire - inspect for wear, pressure,
condition (45lbs +/_ 5lbs)
X
X
Brake assemblies - inspect for wear,
corrosion, leakage
Clean and Inspect
X
X
Hydraulic fluid screen - clean and inspect.
NOTE: If floats sit for extended periods of
time (I.e. If removed during winter months),
screen should be cleaned before putting
floats back into service. Hydraulic fluid in
reservoir should be checked for moisture or
other contaminates and changed if
necessary.
X
X
Insp. FWD slide tube mounting bolt for
corrosion and wear when the gear are out.
Clean and lube the slide tube before
returning.
X
Main and Nose gear actuator, assemblies -
inspect for condition, lubrication, leakage,
corrosion, and cleanliness.
With gear out: Inspect FWD slide tube
mounting bolt for corrosion and wear. Clean
& grease FWD slide tube.
Remove main drag from floats
clean and inspect.
Clean and inspect trunnions
X
X
Nose gear springs - scotchply springs,
inspect for cracks, delamination and paint.
X
X
Main gear drag link garlock bushings -
inspect for condition, lubrication, and
corrosion.
X
X