WIPLINE MODEL 8000 SERVICE MANUAL
Page 34 of 62
1002554 • Rev H
INSTRUCTIONS/PROCEEDURES
HOURLY LIMITS
MECHANIC INSP.
General
Details
25
50
100 200
Annual
Right Left
Water
Rudder
System
& Tail
Water rudder boots - inspect for cuts,
tears, and condition
Water rudder blades and posts -
inspect for damage, security of
attachment, corrosion, paint,
rigging. Check post bolts and
bushings and lube with LPS 2.
Clean and inspect post for cracks.
X
X
Water rudder steering and retract
systems - inspect the following: cables for
broken wire; fittings for cable slippage,
cracks and distortion; cable pulleys for
freedom of rotation and cable guard pins
for presence; rigging
Check cable bolt to pivot arm AN3-6A for
wear.
Check top and bottom rollers for
rotation and lube with LPS 2 or
similar product.
Tension cables to
30 lbs. +/- 5
X
X
On the aircraft: remove clean, inspect and
grease the aux. finlets on the horizontal
stabilizer.
X
Electrical
System
Pump and indicator light wiring - inspect
for chafing, broken or loose terminals and
general condition.
X
X
Solenoids - inspect wiring, mounting and
general condition.
X
X
Pressure Switches - inspect wiring,
mounting and general condition.
X
X
Pump Motors - inspect wiring, mounting
and general condition.
X
X
Landing
Gear
Systems
Inspection and servicing nose gear
tracks:
Gold and white track and block
clean and use grease. Black track
and block – clean and dry or clean
and wipe with silicone spray.
X
X
Nose gear box/block tracks
measured at slide route for wear,
.050 inches or less wear tolerance
Check side play – 3/32 to 1/16
inches max tolerance.
X
X
