a
Note
：
On occasions the fiber protection sleeve may adhere the bottom
of the tube heater. Simply use a cotton swab or similar soft
tip object to gently push the fiber protection sleeve to
dislodge.
（
6
）
Visually check the splice reinforcement for bubbles and impurities.
Shown in Fig.4-16
，
Three for disqualification needed rework;
Twain for eligibility.
Fig.4-12
Possible result
§
4
．
9
．
Storing the fusion splicer
Fusion splicer is an exact instrument. Its carrying caseWY-725-06
is especially design, With guarantee the fusion spliceer not
influence of bump
、
dust
、
hydrosphere. Put in carrying case in time
of the fusion
splicer after fusion.
a
Check
：
Cut off the power before storing.
a
Check: Cleaning the crucial parts in time: Pickup camera
、
Lamp-house lens
、
Fiber press and V-groove, Wipe off the
dust and dunghill.
a
Check: Would the LCD surveillance screen vertical vail,
Entireness cling to the fusion splicer
a
Check
：
Unchain the having line put in the carrying case.
a
Check: Lift the fusion splicer cased the carrying case.
a
Check
：
Cased the other fittings and expendable, Lid and button
the carrying case.
a
Note
：
Eliminate cleanlily the liquid in the bottle in time if
the alcohol bottle in the carrying case . For fear spill
influence the facility.
Page 33
P
<6mm
Bubble on fiber
Bent of fiber
Uniform of sleeve
Bubble on cladding
Least
6mm
Page 34
