§
2.4.3
．
Power Supply Switch and Plugs
Power ON/OFF
Video output
RS-232 interface
§
3
．
Power of Splicing Operation
STEP 1
：
Connect the splicer
★
Three supply: AC power supply/internal battery/external battery.
(1)AC power supply for fusion splicer.
①
Plug AC adapter(WY-725-02),plug one end of AC power cord
(WY-725-03) into AC adapter,an other end into AC power supply.
Press<
>to turn on splicer
；
(2)Internal battery for splicer
Plug internal battery (WY-725-01)into splicer.
Press<
>
，
turn on splicer
；
(3)External battery for fusion splicer.
①
Plug DC adapter into splicer.
②
Plug one end of DC adapter (WY-725-12) into DC adapter ,an other
end into external battery
③
Press<
>
，
Turn on splicer
；
STEP 2
：
Fiber stripping
（
l
）
Clean the fiber outer coating approx. 100mm in length from the
fiber end with alcohol-impregnated lint-free tissue or gauze.
（
2
）
Pass the fiber through the fiber protection sleeve.
（
Fig.3-1
）
（
3
）
Remove the fiber coating 30-40mm with a stripping tool.
]
Check
：
After this operation, handle the fiber so as not to damage
its bare glass
Fig.2-6 Power Supply Switch and Plugs
Page 13
Page 14
