Switch off the machine during work breaks
33
11.2 Poor wash result
Possible cause
Remedy
Wash items not clean
No or low detergent dosing
Set the dosing amount as per the
manufacturer’s specifications (
7.6).
Check the dosing hose (for kinks,
breakage, etc.)
Exchange the container, if empty.
Wash items incorrectly sorted
Do not stack wash items over each other
(
9.3.1).
Jets of the wash arms blocked
Dismantle wash arms and clean jets
(
10.2).
Temperatures too low
Check temperatures (
6.3.2).
Tank water too heavily soiled
Start tank water exchange programme
(
9.3.6)
Spots visible on the wash
items
In case of grease coatings:
The water is too hard
Check the external water treatment.
Carry out basic cleaning.
In case of starch residues:
Temperature of the manual pre-
cleaning exceeds 30 °C
Lower the temperature of the manual pre-
cleaning.
Carry out the basic cleaning programme
(
7.5.2).
The wash items do not dry on
their own
No or low rinse aid dosing
Set the dosing amount as per the
manufacturer’s specifications (
7.6).
Check the dosing hose (for kinks,
breakage, etc.)
Exchange the container, if empty.
Rinse temperature too low
Contact an authorised service technician.
INFO
The water quality affects the washing and drying result. We therefore recommend that the machine
be supplied with softened water from a total hardness of more than 3 dH (0.53 mmol/l).
11.3 Calibrate display
If pressing a button does not elicit any response, the display must be recalibrated.
Switch off the machine.
Touch display.
Press and hold start button for 60 seconds.
Use a ballpoint pen (without reservoir) to touch the centre of the
crosshairs and follow the further instructions given on the
screen.
Switch on the machine.
12 Switch off the machine during work breaks
Empty the machine using the self-cleaning programme (
10.1.1).
Clean the machine (
10.1.2 and 10.1.3).
Leave the door open in the locking position.
Close the on-site water stop cock.
Switch off the local mains disconnector.
If the machine is in a place that is not frost-free:
Instruct an authorised service technician to make the machine frost-resistant.
