Winterhalter UC series, Operating Instructions Manual

Page: 37 / 48

Installing the machine
35
15 Installing the machine
The installation site must be frost-resistant to prevent the water supply systems from freezing.

Install the machine horizontally using a spirit level.

Adjust the base unevenness using the height-adjustable machine feet.
16 Connecting the machine
Warning
The machine and any other relevant additional devices must be connected in adherence to
local standards and regulations by an electrical company authorised by the relevant electricity
supplier.
16.1 Location of connections on the machine
UC-S
UC-S Energy UC-M, UC-L, UC-XL
UC-M Energy, UC-L Energy, UC-XL Energy
Rear view Right view
EZ
Entry for mains cable
DOS Port for hoses (detergent / rinse aid) and cables
TWw
Inlet‎water‎connection‎(G‎¾“,‎external‎thread)
LAN Connection for patch cable CAT.7 (socket RJ45); (if the machine is to be networked)
P Connection for on-site equipotential bonding system
A Waste water connection; drain pump installed
16.2 Accessories
1 Flexible supply hose connect to point TWw
2 Flexible drain hose connect to point A
3 Dirt trap Install between the water supply and the supply hose
62
P TWw EZ DOS A
460
TWw DOS P A
600
LAN EZ LAN
G 3/4" G 3/4"
G 3/4"
1500 mm 1500 mm
Ø
2
4
Ø
2
8
Ø
4
6
Ø
1
8
,5
Ø
2
2
,2
Ø
3
9
,7
G 3/4"
1 2 3