Winterhalter Gastronom GmbH
Pf. 1152 D-88070 Meckenbeuren
OI GSR36/GSR36E 89003475 09/00 sch P.2
3. Installation and commissioning
The installation of the machine and the service connections to the water supply and drain
pipes must be effected in accordance with „Installation Instructions for Winterhalter Gastro-
nom Dish and Utensils Washing Machines“.
The factory representation of Messrs. Winterhalter Gastronom which is competent for the
site of the machine, has to perform the first commissioning and the instruction of the personal
according to the „Commissioning Instructions for Winterhalter Gastronom Dish and Utensils
Washing Machines“. Therefore please contact this company when the machine has been
connected orderly to the supplay pipes on site.
·
Only after finishing all connection works your dishwasher is ready for commissioning.
4. Operating and control instruments
1 Mains switch
By pressing the machine is
switched on (lights up when
switched on)
By pressing again the machine
is switched off again (extinguis-
hes)
2 „Ready for operation“ This white lamp is lit during
the heating up phase of the tank
water. It extinguishes when the
temperature of the tank water
has reached the required value.
Now washing may be started.
3 Programme
1
By pressing the cycle is re-
leased for slightly soiled dishes
(is lit during the cycle).
4 Programme
2
By pressing the cycle is re-
leased for strongly soiled dishes
(is lit during the cycle).
5 Continuous washing
6 Tank cleaning
7 Manual cold
As long as this button is
prerinsing
pressed, the cold water prerin-
sing is in operation.
Option.
8 Pilot light „REG“ When lit there is an failure in the
water softening appliance or
lack of salt with the GSR 36 E.
Option at the GSR 36.