89007105
19
Display Cause
Remedy
Key flashes blue
If the cutlery has not been properly
cleared away beforehand, so much dirt
may have collected on the flat filter and
in the filter cassette that the rinsing
program can no longer run properly.
The washing pump switches off and the
program key flashes blue.
•
Switch off machine, the program key will
continue to flash.
•
Take out filters, clean and replace them.
•
After two minutes, the flashing will stop.
Switch the machine back on and con-
tinue to run it.
•
Clear away the cutlery more carefully to
avoid further malfunctions.
13.2 Malfunctions calling for the Winterhalter customer service
Red flashing light:
Temperature in boiler or tank is greater than 95°C.
Caution: Surface is very hot.
The fault (3) symbol appears together with the fault code
Err 2 or Err 3. Switch off the mains disconnecting device (mains switch) provided by the
customer.
Notify the Winterhalter service team immediately.
When the machine can no longer be used because of internal faults, the machine turns itself off automati-
cally and displays an error code.
Display
Possible cause
Remedy
Machine switches
off and displays
Err
1, 11
Fault inside machine
Notify Winterhalter customer service
Machine switches
off and displays
Err
6
Fault inside machine or
water drain is clogged
Notify Winterhalter customer service or remove
cause of clogging.
Machine is swit-
ched off and dis-
plays
Err
21
Magnetic valve not closing
Close the water shut-off valve and notify
Winterhalter customer service.
Machine switches
off and displays
nothing at all
Fault inside machine
Notify Winterhalter customer service
Summary of Contents for GS 600 Series
Page 23: ......
