24
/
: Single-or multiple-screen, switch to the previous/next picture display.
:
Switch the screen split screen mode.
: Alarms are triggered, cancel the warning.
Channel Status
：
The channel is a remote monitoring, shown in green; the corresponding channel video, shown in
red; the corresponding channel alarms triggered, displayed as yellow and the Flash.
Section 5
PTZ Control
PTZ Setup
Enter ―Main Menu
－
PTZ Setup
－
PTZ ‖ as shown in Fig.15.
Fig. 15
PTZ Port:
2U Case D1 model and 2U Case CIF model, select a port for PTZ connection.
RS-485 parameters:
Including baudrate, data bit, stop bit, parity bit, flow control, etc. These parameters
must be the same as those of PTZ Protocol.
PTZ Addr:
Each PTZ has one different address.
Protocol:
DVR had the following PTZ protocol: PELCO-D
、
PELCO-P2
、
PELCO-P1
、
W110
、
P3
、
PLD
、
ENKEL
、
YAAN
、
SONY
、
JC4116
、
PD-NW
、
PD-CONST
、
PIH-1016
、
KRE301
、
PELCO9760
、
LILIN
、
T3609HD
、
HD600
、
KTD
、
SAMSUNG
、
ELEC
、
PANASONIC
、
FASTRAX
、
DL-0001.
Speed:
PTZ turning speed.
Rotate:
When you set the PTZ is continuous send command.
Vertical:
Reverse PTZ‘s vertical field.
Horization:
Reverse PTZ‘s horizontal field.
