9
POWER ON/OFF
• The Dash Monitor will automatically turn ON when it is connected to a power source.
• Hold the power button to turn ON/OFF the unit if necessary.
CONNECTION AND VIEW SELECTION
• The Backup Camera that is included in this System is set as the Default Camera (Camera 1). When
installed as directed by powering through 7-way round plug adapter or license plate mount
adapter, the rearview image will automatically appear on the screen during reverse and will
remain in standby when the vehicle is in any other gear or driving forward. If the Camera is
manually powered on by battery, it will be constantly powered instead of only when in reverse gear.
• In addition to the Backup Camera, this System can pair with ONE Type S Add-On Camera. The
Type S Add-On Camera is designated Camera 2 when paired to the system. To view, toggle the
Channel Button once to switch camera views and again to see a split view. Keep in mind the
point above regarding view priority
PARKING AID LINE
• You can turn ON/OFF the Parking Aid Line by pressing the Parking Aid Line button when the
reverse image appears on screen.
• You can adjust the parking aid line that appears in your monitor. When the Parking Aid Line is
engaged, press and hold the Parking Aid Line button for 3 seconds, then press the “+” or “-” to
adjust up or down on the monitor. There are a total of 10 adjustments that can be made.
5. SETTINGS AND OPERATION
Power
Parking Aid Line / Enter
Up
Menu
Down
Channel Button
