8
15. Press the license plate and the adapter mounting firmly to the car to secure and get full contact
between the license plate and the double-sided tape. Screw the license plate back onto the rear
of your vehicle.
16. Attach the Camera to the adapter, you can adjust the vertical angle of the Camera to your
specific need.
17. As a last check, note the position of the view from the Camera when you place the vehicle in
reverse. Adjust the angle of the Camera as necessary to achieve the best rear view.
18. There is no need to remove and recharge the camera.
*If the 12/24V socket provides constant power, please unplug the monitor power adapter when the
vehicle is not in use.
*Please follow your local laws and regulations regarding constant monitoring while driving. It is
recommended that you glance at the image only when in reverse, and use as an aid. Do not rely solely
on the camera view to back up.
*By using the power button on the Monitor, the image can be shut off while driving. Please remember
to turn back on once the vehicle is stopped and ready to reverse.
*When running the power cable inside of the vehicle do not close doors or windows on the cable or
obstruct it in any way.
