AFTER SALES SUPPORT
1300 663 907
AUS
MODEL: AU170023 PRODUCT CODE: 58797 10/2017
9
First Use
1. Start the engine of your vehicle, this will automatically power on the HUD.
a. Once the HUD is powered on, it will show the current vehicle voltage.
2. Press the Function/ Settings button inwards.
a. This will check your vehicle’s Engine Control
Unit (ECU) State in this one instance.
3. If the HUD shows the vehicle’s speed the HUD has been installed successfully.
a. If after a minute the HUD is only displaying the voltage, check if the HUD’s
OBD-II data cable is connected correctly.
Note - Ensure the OBD-II cable is plugged in tightly
4. If the HUD is still not working, please check to see if your vehicle is OBD-II
compatible.
Reflection Film and Non-Slip Mat Installation
1. Place the supplied non-slip mat (with the adhesive sticker still on) towards the
front of the dashboard .
2. Place the HUD on it with the USB port facing away from the driver.
3. Maneuver the HUD until it’s in a good position.
4. Remove adhesive sticker from the back of the non-
slip mat and secure it to the dashboard, then place
the HUD on top of it.
5. Stick the reflection film on a clean and dry
windscreen so the digital read out of the HUD is clear.
Remove backing film on reflection film and paste
right above the HUD. It should be able to reflect the whole display screen.
Ensure there are no bubbles behind the reflection film.
Instructions
MPH
Km/ h
V
C
o
o
F
Summary of Contents for AutoXS AU170023
Page 1: ...HEAD UP DISPLAY USER GUIDE CAR ACCESSORIES MPH Km h X1000RPM V C o o F 0 1 2 3 4 5 6 7...
Page 15: ......
Page 16: ......
