Winplus AutoXS AU170023, User Manual

Page: 8 / 16

AFTER SALES SUPPORT
1300 663 907 AUS
MODEL: AU170023 PRODUCT CODE: 58797 10/2017
customercare@winplus.com.au
8
Instructions
OBD-II Connection Process
This HUD has been tested on a variety of vehicles with an OBD-II interface and a
12V battery system. Please refer to your vehicle’s user manual before installation.
The HUD is compatible with the OBD-II interface which allows for “Plug & Play”
installation without the need to modify your vehicle’s wiring
1. Ensure your vehicle is OBD-II certified – If you are unsure please visit the below
website.
https://www.fueleconomysolutions.com.au/page/obd-ii-applications-guide/
list-of-obd-ii-cars-in-australia/
2. Make sure your vehicle has an OBD-II connector - usually found under the
drivers side of the dashboard (as per the below picture)
3. It is recommended that the engine be turned off; connect the OBD-II cable
(included in package) to your vehicle’s OBD-II jack.
4. Connect the other end of the cable (mini USB connector) to HUD device.
5. It is recommended that the cable be routed away from the center of the
dash. For example, around the drivers side dash and tucked under trims. Seek
professional assistance if required.