38
The Winnov Videum hardware and software system enables you to
plug several Videum capture cards into your Windows 2000 and/or
Windows XP system.
1. Choose the device you want.
If you have inserted two Videum 4100/4400 capture cards in one
system, Videum Software won’t recognize the number of capture
cards you inserted in your system. Rather Videum Software
recognizes the number of devices you have. A device is an audio
and video data stream. Each device is assigned a unique number so
that you know which one you are using.
If you have installed two Videum 4400s, you will have 8 devices
numbered from 0 to 7.
If you have installed two Videum 10xxs or 4100s, you will have 2
devices numbered 0 and 1.
Because of operating sytem limitations, you cannot install more than two
Videum 4400 boards in one system. You may install up to nine Videum
4100 in one system.
Multiple capture cards in one system
2. To select the device you want:
Open Videum Capture by right clicking on the Winnov Eye located
in your system tray.
Videum Capture
allows you to select a device in
the
Video Properties
dialog box in the
Device
list box.
Or
Open Videum Status by right clicking on the Winnov Eye located
on your system tray. Videum Status also allows you to directly select
the device you want.
3. Configure your devices.
Videum Configure is designed to help you configure the audio and
video properties of your devices.
4. Use multiple devices with other applications.
Most video applications, such as Windows Media Encoder and
Microsoft NetMeeting also allow the audio and video devices to be
selected. Refer to your application’s userguide for more information.
Some applications such as Adobe Premiere may not support more
than 1 card.
