35
Configuration of the Breakout Box
VideumII BroadCaster Base Kit (only)
Configuring the Breakout Box
If you have a VideumII Broadcaster Base Kit, you have to configure your
Breakout Box. Winnov does not ship a video source/camera with the
purchase of a VideumII Broadcaster. Therefore, to continue with this
installation tutorial, you must have a S-Video or composite video
source and configure the provided VideumII Breakout Box. Figure 2.4
shows a sample Breakout Box.
Look at the label on top of the breakout box to identify the
connectors.
With your video source handy, do the following to configure your
VideumII Breakout Box for use with your video source.
1. Connect the audio and video source.
Plug your camera into any of the BNC connectors on your
VideumII Breakout Box.
Make sure that your audio source is plugged into one of the audio
input connectors on your Breakout Box.
The VideumII Breakout Box is now connected. The VideumII
Breakout Box must be connected before the system is powered on
for it to be recognized by the system.
2. Run the “Video Source Configuration” Utilities.
The “Video Source Configuration” utilities will allow you to
configure your Breakout Box. Select Start | Programs | Winnov
Videum NT | Utilities | Video Source Configuration. Figure 2.5
appears.
Figure 2.4: Breakout Box
