Cbox 3 User guide
V. 3.3.030
-46-
10.5.2.
Live Broadcasting Configuration
Broadcast configurations are groups of settings which describe how broadcasts are distributed.
To do a live broadcast, a broadcast configuration must exist. Broadcast configurations should
be reusable once they have been created.
To setup a new configuration or chose one that already exists, go on
BROADCAST MANAGER
,
then click on the button
CREATE
.
1.
Name your configuration
2.
Fill out the
MEDIA STREAMS
information.
You have two
DISTRIBUTION MODES
:
•
SERVER PUSH
: In some live encoding situations, the streaming server may not be able to
coordinate the content feed between the encoder and the server. With Server Push you
can use the encoder to control the server to send the encoded content to a broadcast
publishing point. Using server push, you will have to log in to the server to distribute
your streaming media. This is a very handy tool if your encoding computer is set up
behind a router and you do not know how to configure your router to port forward,
however it can also cause problems. A disadvantage of using push is if your connection
drops, you will lose your connection to the server. Manual re-connect to the server is
required to continue streaming. You will also need to re-start your encoder.
Summary of Contents for Cbox 3
