Winnov Cbox 3, User Manual

Page: 12 / 96

Cbox 3 User guide V. 3.3.030
-12-
Both outputs support the analog VGA interface and also provide a DVI interface, which
guarantees a better display quality. Therefore, the DVI interface should be
used whenever
possible. If no Monitor or Projector with DVI Interface is available, then a DVI-I to HD15 adapter
is required for connecting to the DVI-I socket.
When two devices are in use, in order to display the audience view, the nVIDIA
graphics card has to be set to DualView. If it was set to Span, Clone or Single display,
audience view will not be displayed in the second VGA output device.
The Cbox 3 application has a mechanism for swapping the assignment of the devices. This
mechanism can be triggered by using the top menu strip item "
View- Swap Screens ". This
feature should be used when your operator VGA output device is displaying the audience view
and your audience VGA output device is displaying the operator interface.
The frame rate of the audience view is limited due to the fact that this is the output
of the RGB source that has been processed. A VGA splitter can be used to connect
the VGA source to the RGB capture card and to the projector to provide the full
frame to the audience view.
7.2.3. Audio Monitor Output
The Audio monitor output is very useful for the operator to get a preview of the audio sources or
to verify the audio quality of the current Live Stream (recording or broadcasting).
Audio Preview
Connect to Headphone
Figure 9 – Cbox 3 Front View with Audio Monitor Output
7.2.4. Audio Out for Room Sound System
The Audio output of the Cbox 3 appliance can be used to connect to the room sound system or
to a PC Speaker set. The A/V Adapter cable provides a balanced line-level stereo audio out
signal (Audio R Out, Audio L Out) via XLR connectors. Standard adapter/cables can be used to
interface to unbalanced line-level Audio input of the room sound system or to a PC speaker set.
Figure 10 - Balanced Audio OUT XLR (male) connectors