![background image](http://html1.mh-extra.com/html/winnebago/journey/journey_operators-manual_987365047.webp)
3-21
SECTION 3 –
DRIVING YOUR MOTORHOME
1. Lift bed board and disconnect air bed hoses
from the pump (located beneath the bed
board).
2. Route air bed hoses through the hole at the
head of the bed.
3. Lower the bed board and remove mattress
from bed and set aside in another area of the
coach.
4. Lift the bed board and remove gas struts (one
located on each side of bed board).
5. Remove six screws (located on top of the
rearward bed board) and set aside.
6. Remove bed board and set aside in another
area of the coach.
7. Remove fasteners from metal engine cover
and set aside to access engine.
8. Reverse steps to reinstall engine access cover
and bed board.
Model 40R and 42E
Forward Engine Access Cover (Beneath
rear bath floor)
1. Remove rear bath rug (if equipped) and set
aside.
2. Using the Engine Cover Latch Key (located
on your key ring), unlock the Engine Cover
Latch by turning counter-clockwise.
• Route Air Bed Hoses
through hole at the head
of the bed.
• Remove six screws from
rearward bed board (three on
each side).
• Rearward Engine Access Cover
Engine Cover Latch Key
(Located on key ring)