9-7
SECTION 9 –
FURNITURE AND SOFTGOODS
10. Insert table extension to adjoin with dinette
table.
NOTE: Table extension is stored beneath rear
bed.
11. Reverse steps to convert into single dinette
seating.
Dinette to Bed
•
Perform Steps 1 through 6 in
Dinette and
Table Extension
section.
•
Press the Table Leg Release Button and fold
table leg UP until it “clicks” into locked (90-
degree) position.
•
Remove dinette table from the wall support by
lowering leg end of table and pivoting the
table to release from the wall.
•
Lift end of table up and loosen knobs beneath
dinette table (one located on each side of
table).
•
Lower dinette table to the floor.
•
Grasp the dinette table extension and pull
OUT to fully extended position.
Table Leg Release Button
